The product is exempt from VAT as per art. 124, DL 34/2020.
FFP2 mask. Equipped with double elastic. The particular shape guarantees maximum comfort. Adjustable nose clip in aluminum. The face mask meets the requirements of the harmonized technical standards CE 2163 EN 149:2001+A1:2009. Minimum filtration efficiency of 95% certificated CE.
All masks are in our warehouses in Italy and ready to be shipped. These products are called PPE personal protective equipment and are used to filter pathogens, viruses, bacteria and dust.
‼️ SAVE BY BUYING MORE QUANTITIES‼️
For more quantities, please contact our sales office available through our page contacts.
The higher the filtering factor, the greater the protection against pathogens. PPE are classified into levels: FFP1, FFP2 and FFP3 acronym for Filtering Face Pier, or filtering power) which indicate the filtering capacity. The main difference between the 3 levels is in the filtering power of particles larger than 0.6 microns. DPI FFP1 filters at least 80, DPI FFP2 filter at least 94 this model and DPI FFP3 filter at least 99.99%.
Indications and method of use
Suitable for the protection of the respiratory tract from dust, including toxic ones such as silica, mineral processing, arsenic, beryllium, silver, platinum, lead, cadmium, cotton, non-greasy mists and metallic or plastic fumes, in concentrations not exceeding 10 ten times the LT or TLV occupational exposure limit of these particulates and may contain fiber fabrics, Portland refined cement, iron ore, coal ore, aluminum ore, detergent, talc, lime, caustic soda, vegetable powders such as wheat, rice, corn , cane bagasse, etc., poultry powders containing remaining feed, bird droppings, feathers and feathers, sanding and grinding.molatura.
It is also indicated for the protection of the respiratory tract from dusts, mists and fumes containing radioactive materials such as: uranium and plutonium which emit alpha, beta and gamma radiation. It is personal and non-transferable.
The mask should be kept in a place with good ventilation, clean, dry, avoiding humidity and exposure to contaminants. We recommend a minimum temperature of 4 degrees and a maximum temperature of 30 degrees.
It varies according to the type of contaminant, its concentration, the user's respiratory rate, the relative humidity of the environment and the conservation of the product by the user. Therefore this variable must always be evaluated by the person responsible for determining the use of PPE. It must be changed every time it is saturated clogged, perforated, torn or with loose or broken elastic or when the user perceives the smell or taste of the contaminant. No repairs or maintenance must be performed on the product. In the specified non-use stock conditions, its validity is 3 years from the date of manufacture.
Certifications: CE 2163 EN 149:2001+A1:2009
Use: Protection from dust, smoke and solid and liquid aerosols harmful to health
Production: Made in China
For more information please visit our dedicated page about mask features.
Limitation and warnings for use
This respirator must not be used for respiratory protection against asbestos, jets of sand, gas or in atmospheres containing oily mists.
It must not be used against highly toxic powders, i.e. with a tolerance limit lower than 0.05 mg / m3.
Since it is a filtering material and does not supply oxygen, it must not be used in closed environments without ventilation such as: chambers, tanks, silos and pipes or where the oxygen concentration can be less than 19.5% by volume..
It must not be used when the concentration of the contaminant exceeds the IPVS values. Immediately dangerous for life and health or is greater than 10 times the value of the tolerance limit.a.
The product must not be altered or modified for use.
It should not be used by people with beards or deep scars on their face as this prevents an effective seal of the respirator on the user's face.
Return and refund
Being a medical product, returns cannot be accepted.